PINO E - Building Instruction
July 2017
www.pcm.at
3
DATA
1. Kit – contents
Fu canopy
Wing
Elevator
Lever for controlling rudder, 1 pc.
Lever for controlling ailerons, 2 pc.
Lever for controlling flaps, 2 pc.
Steel wire 1,2mm for rudder, 1 pc.
M2,5 screw rod for controlling ailerons, 4 pc.
8x lever connectors M2,5
1x lever connectors M2
M4 metal screws for fixing wing, 4 pc.
M4 nylon screws for fixing wing, 4 pc.
Spring-loaded contacts 2 pairs.
Building instruction (for download from our website)
Connectors / ballast:
Segler / Glider
Elektro
Normal (Slope)
Medium
1x Kohlestab /
carbon rod
1x Stahl lang /
steel long
2x Stahl kurz /
steel short
1x Kohlestab /
carbon rod
1x Stahl lang /
steel long
2x Stahl kurz /
steel short
Ultralight
2. What else do you need:
Epoxy-glue (for example UHU 300 endfest or Pattex Stabilith)
Super glue (runny)
Electrical equipment (On/Off-switch, cables, plug...)
Electronic equipment
Shrinking tube...
3. Electronic equipment (recommendation)
Servo ailerons and flaps:
- KST DS 135 MG
Servo rudder and elevator:
- KST X08
Receiver:
- for 4 wing servos, rudder and elevator servos
Motor:
- Schambeck Powerline 1025
Controller:
- YGE60LVS
Prop:
- RFM 16 x 8,5 narrow
Spinner:
- D=28mm
Accumulators:
- Lipo 3S from 850-1000mA/h
Following cells fit well into the fuselage:
Wellpower SE CH8 850mA/h, 3S, 71g, 75/25/20
Wellpower SE „sonder“ 950mA/h, 3S, 70g, 75/25/19
Wellpower SE V2 CH8 1000mA/h, 3S, 93g, 64/32/23
Source: Modellbau Lindinger
