PINO E - Building Instruction
July 2017
www.pcm.at
7
Now,
slide the cables
through
the hole.
Then
solder
the cable to the
contacts.
It is very important to
insulate all the contacts
that could touch the carbon.
We use “Plasti Dip” for such
purposes.
Make sure that the contact
fits easily
into the free
space, which is provided for
the contact, without putting
any force on the soldered
areas.
Before you fix the contact
with a drop of runny super
glue, check if
all the servos
work well
.
Anyone who is afraid that
this work can not be
carried out adequately,
should use usual plug
connections. If the spring
contacts are installed
incorrectly, the model may
be totally lost.
Now you can stick the
seals over the gaps
.
