PINO E - Building Instruction
July 2017
www.pcm.at
10
Now screw the
narrow
board
to the bottom
of the
servoboard.
In order to glue it into the
fuselage, put a mixture of
epoxy-cottonflocs just
onto this narrow board
.
Then put the
servoboard
into the fuselage
.
Connect the horns
to the
pushrods and set
everything to
zero
(servos
and control surfaces).
Then press the board down
to
glue it well
to the
bottom.
Zero
position of the
elevator
is
77mm
.
