OAFE-2000
IO&M Manual
Paragon Controls Incorporated
15
Revision Level 000
5. MENU INFORMATION
5.1.
Levels of Menus
The following is a tree view of the available menu pages on the bottom of the Main Screen (see Figure
4.1). Pressing one of these menu buttons loads a separate menu as described below. An icon with a
back-arrow key is present in every menu page in the lower left corner of the screen. This arrow key will
return you to the previous page.
NORMAL
ACTIVE
DISPLA
Y
SETUP MENU
All job specific parameters and configuation
information is entered here (See Section 5.2)
DIAGNOSTICS
Sensor Data Page
View flow rate, pressure data, and status
for each individual sensor
System Overview
View system and parameter configuration
information
Factory Defaults
Reset MTSE to Factory Default Settings
(Caution - resetting will remove parameters
set in the field)
Software Update
If instructed by the Factory, software can
be upgraded by inserting new microSD
(uSD) card
Screen Saver Mode
Toggle On or Off Screen saver
Factory
Password protected factory configuration
menu
AutoZero Settings
(only available when AZ is ordered)
Initiate true AutoZero by pressing Run
AutoZero
Enable/Disable AutoZero
AutoZero Interval
(in hours upto 24)
K-FACTOR
Shortcut button to K-Factor Page in
Setup Menu
NOTIFICATION
Alarms and other warnings are visible here
? (INFORMATION)
Company information and software revision
are visible here
Troubleshooting information is also visible
with the right arrow
