© PCE Instruments
1
1
Safety notes
Please read this manual carefully and completely before you use the device for the first time. The
device may only be used by qualified personnel and repaired by PCE Instruments personnel.
Damage or injuries caused by non-observance of the manual are excluded from our liability and
not covered by our warranty.
•
The device must only be used as described in this instruction manual. If used otherwise,
this can cause dangerous situations for the user and damage to the meter.
•
The instrument may only be used if the environmental conditions (temperature, relative
humidity, …) are within the ranges stated in the technical specifications. Do not expose
the device to extreme temperatures, direct sunlight, extreme humidity or moisture.
•
Do not expose the device to shocks or strong vibrations.
•
The case should only be opened by qualified PCE Instruments personnel.
•
Never use the instrument when your hands are wet.
•
You must not make any technical changes to the device.
•
The appliance should only be cleaned with a damp cloth. Use only pH-neutral cleaner,
no abrasives or solvents.
•
The device must only be used with accessories from PCE Instruments or equivalent.
•
Before each use, inspect the case for visible damage. If any damage is visible, do not
use the device.
•
Do not use the instrument in explosive atmospheres.
•
The measurement range as stated in the specifications must not be exceeded under
any circumstances.
•
To prevent electrical shocks or damage to the instrument, do not connect more than 30
V between the terminals, or between the terminals and the ground.
•
This instrument uses a Lithium-Ion battery pack. To prevent an explosion or fire, do not
short circuit, do not disassemble and keep it safe from damage.
•
To prevent battery leakage or heat generation, only use the battery charger in the
temperature range 0 … 45 °C (32 … 113 °F).
•
To make sure the display shows the correct data, disconnect the test leads before you
set the power to on or change to another measure or source function.
•
To prevent damage to the display, do not use sharp objects on the screen.
•
Only sufficiently skilled persons may use the meter. Qualifications from an approved
training establishment may be necessary.
•
Follow good engineering practice at all times.
•
Non-observance of the safety notes can cause damage to the device and injuries to
the user.
We do not assume liability for printing errors or any other mistakes in this manual.
We expressly point to our general guarantee terms which can be found in our general terms of
business.
If you have any questions please contact PCE Instruments. The contact details can be found at
the end of this manual.
