© PCE Instruments
17
ii. EditBox
EditBox is used where a large range of values is possible for a parameter.
To edit the value of an EditBox, press
F1
key. After that EditBox enters Edit mode where
F1
and
F2
keys work as shifter. User can shift to desired digit and using
UP
or
DOWN
key digit value can
be incremented or decremented. The modified value can be saved using
MENU/ENT
key.
The above figure shows the example how to change Input High (100%) Range from 24.000 to
10.000 mA.
There are mainly 2 types of EditBox in this device. In most of the EditBox changing of decimal
point & changing of sign is not allowed. But there are few EditBox, where these are allowed.
Examples Scaled Low (0%) & High (100%) etc.
The below figure shown the example how to change decimal point of the Input Scaled High
(100%) Range.
