© PCE Instruments
10
12 Backlight
To enable the backlight, press and hold the ZERO key until the backlight is activated. To turn off
the backlight, press and hold the ZERO key again. The backlight will turn off automatically after
15 seconds.
13 Replace the batteries
If the battery power is no longer sufficient, the battery icon will be displayed. To replace the
batteries, first remove the test leads from the meter and turn it off. Now open the battery
compartment at the rear side the cover of which is affixed with four screws. After opening the
battery compartment, insert six 1.5 V AA batteries. Close the battery compartment.
14 Replace the fuse
To replace the fuse, first remove the test leads form the meter and turn it off. Open the battery
compartment at the rear side the cover of which is affixed with four screws. Remove all batteries.
You can now replace the fuse. Only use an FF 500 mA 1000 V fuse.
15 Warranty
You can read our warranty terms in our General Business Terms which you can find here:
https://www.pce-instruments.com/english/terms
16 Disposal
For the disposal of batteries in the EU, the 2006/66/EC
directive of the European Parliament
applies. Due to the contained pollutants, batteries must not be disposed of as household waste.
They must be given to collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use
them or give them to a recycling company which disposes of the devices in line with law.
For countries outside the EU, batteries and devices should be disposed of in accordance with
your local waste regulations.
If you have any questions, please contact PCE Instruments.
