PCE Instruments PCE-HDM 20, Руководство пользователя

Страница: 29 / 34

© PCE Instruments
26
How to capture screen
When in DMM mode or Thermal i DMM mode, use HOLD button to enter hold mode, as
shown below. Then press UP button to capture screen. After saving to TF card completely,
multimeter will exit hold mode.
7 Technical specifications
General technical data
Display Colour TFT, 6000 points with status display
Conversion TRMS
Reference standards IEC/EN61010-1, IEC/EN61326-1
Isolation Double
Pollution degree 2
Overload category CAT IV 600 V, CAT III 1000 V
Battery type 1 x 7.4V Li-Ion battery, 2300-mAh
Power supply charger 100 / 240V AC, 50/60 Hz, 10V DC, 1 A
Battery level indicator Yes
Automatic shutdown After 15, 30 or 60 minutes of inactivity
(deactivatable)
Fuses F10A/1000V, 10 x 38 mm (Input 10 A)
F800mA/1000V, 6 x 32 mm (Input mA, µA)
Test temperature 18 ... 28°C / 64 ... 82°F
Operating conditions 5 ... 40°C / 41 ... 104°F, <80% r.H.
Storage conditions -20 ... 60°C / -4 ... 140°F, <80% r.H.
Maximum operating height 2000 m / 2187 yd
Dimensions 175 x 85 x 55 mm / 6.9 x 3.3 x 2.1 in
Weight 540 g / 1 lb 3oz