© PCE Instruments
17
4.3
Using the multimeter with the thermal imager
On IR+DMM mode, MODE key, RANGE key, HOLD key and REL function are the same as in
DMM mode.
Capturing MAXMIN values on IR+DMM
mode
1.To activate the maxmin mode, press the
softkey labeled◄ and display max value.
2. If the meter is already in the maxmin
function, then p
ress the ◄ key to display
min value, then p
ress the ◄ key to display
current measurement value. Next press
again display max value.
3. Then p
ress and hold the ◄ key for more
than 1 second to make the meter turn off
maxmin.
Capturing Peak values on IR+DMM mode
1. To activate peak mode, press the softkey
labelled
► and display Peak max value.
2. If the meter is already in peak function,
then press the
► key to display Peak
min value, then press the
► key to display
current measurement value. Next press
again display Peak max value.
3.Then press and hold the
► key for more
than 1 second to make the meter turn off
peak.
5
Settings menu
5.1
Using settings menus
• Press MENU button to open the Settings menus, as show below.
• Press UP/DOWN button to select menu item or change the value of current focus item.
• Press RIGHT/MENU button to enter the submenu or set focus on the currently selected item.
Press LEFT button to return to the previous menu.
• If you want to exit the settings menus, press MODE/RANGE/HOLD/IR button or press LEFT
button in root menu.
