© PCE Instruments
8
6.5
LED Measurement
•
Switch the device to x10 on the resistance range (
Ω)
•
Insert the test leads as shown in the figure below
•
Measure the current of the LED and read the result on the DC mA scale (13)
•
LI reads the positive current. LV reads the positive voltage
6.6
Continuity Test
•
Switch the device to
/x1
Ω range
•
Adjust the pointer manually to zero (4)
•
Insert the test leads as shown in the figure below
•
Measure the resistance and read the result on the resistance scale (
Ω) (9)
•
If the resistance is below 100
Ω the buzzer will sound
