PCE Health and Fitness PCE-TDS 100 H, Руководство пользователя

Страница: 33 / 45

© PCE Instruments
29
5.2 Configuration of parameters
Menu Function
M00 View three totalisers (positive, negative, net), signal strength, signal quality
and operating status
M01 View positive totaliser, volume flow , velocity, signal strength, signal quality and
operating status
M02 View negative totaliser, volume flow , velocity, signal strength, signal quality
and operating status
M03 View net totaliser, volume flow , velocity, signal strength, signal quality and
operating status
M04 View date and time, volume flow , signal strength, signal quality and operating
status
M05 View date and time, velocity, signal strength, signal quality and operating
status
M06 Waveform of the received signal
M07 View battery voltage and remaining battery life
M08 View each operating status, signal strength and signal quality in detail
M09 Display
today’s volume flow , velocity, signal strength, signal quality and
operating status
M10 Enter outer perimeter of pipe
M11 Enter outer diameter of pipe, value betw een 0 and 6,000 mm can be selected
M12 Enter w all thickness of pipe
M13 Enter inner diameter of pipe
M14 Select standard pipe material (if pipe material is included here, no pipe sound
velocity is needed):
0. Carbon Steel, 1. Stainless Steel, 2. Cast Iron, 3. Ductile Iron, 4. Copper,
5. PVC, 6. Aluminium, 7. Asbestos, 8. Fiber Glass 9. Other
M15 Enter pipe sound velocity; only necessary if material does not belong to
standard materials
M16 Select liner material; if the pipe used does not have a
liner, select „0. No Liner“
1. Tar Epoxy, 2. Rubber, 3. Mortar, 4. Polypropylen, 5. Polystyrol,
6. Polystyrene, 7. Polyester, 8. Polyethylene, 9. Ebonite, 10. Teflon, 11. Other
M17 Enter liner sound velocity; only necessary if material is not listed under M16
M18 Enter material thickness of liner
M19 Enter absolute thickness of inner w all
M20
Select standard liquid:
0. Water, 1. Sea Water, 2. Kerosene, 3. Gasoline, 4. Fuel Oil, 5.Crude Oil,
6. Propane, 7. Butane, 8. Other, 9. Diesel Oil, 10. Castor Oil,
11. Peanut Oil, 12. Gasoline ROZ 90, 13. Gasoline ROZ 93, 14. Alcohol, 15.
Water (125
°C)
M21 Enter fluid sound velocity; only necessary if liquid does not belong to standard
liquids
M22 Enter viscosity of liquid (only necessary if liquid does not belong to standard
liquids)
M23 Select sensors out of 16 types:
1. Plug-in Type A
2. Clamp-on TM-1
3. User Type
4. Standard-B
5. Plug Type B45
6. Standard-L
7. Clamp-On TS-2
E
n
g
lis
h