ECP Mode Use DMA (3)
When the onboard parallel port is set to ECP mode, the parallel
port can use DMA 3 or DMA 1.
Press <Esc> to return to the Integrated Peripherals screen.
Init Display First (PCI Slot)
Use this item to specify whether your graphics adapter is installed
in one of the PCI slots or is integrated on the mainboard.
OnChip USB Controller (All Enabled)
Enable this item if you plan to use the Universal Serial Bus ports
on this mainboard.
USB Keyboard Support (Disabled)
Enable this item if you plan to use a keyboard connected through
the USB port in a legacy operating system (such as DOS) that does
not support Plug and Play.
USB Mouse Support (Disabled)
Enable this item if you plan to use a USB mouse.
IDE HDD Block Mode (Enabled)
Enable this field if your IDE hard drive supports block mode.
Block mode enables BIOS to automatically detect the optimal
number of block read and writes per sector that the drive can
support and improves the speed of access to IDE devices.
33
