Jumper Settings
Connecting two pins with a jumper cap is SHORT; removing a
jumper cap from these pins, OPEN.
JP1
1
1
JP2
JP1: Clear CMOS Jumper
Use this jumper to clear the contents of the CMOS memory. You
may need to clear the CMOS memory if the settings in the Setup
Utility are incorrect and prevent your mainboard from operating.
To clear the CMOS memory, disconnect all the power cables from
the mainboard and then move the jumper cap into the CLEAR
setting for a few seconds.
Function Jumper
Setting
Normal
Short Pins 1-2
Clear CMOS
Short Pins 2-3
JP2: CPU Frequency Select Jumper
Set the CPU frequency (100MHz or 133MHz) according to the
CPU.
Function Jumper
Setting
100 MHz
Short Pins 1-2
133 MHz
Short Pins 2-3
12
