PCC FTI FT-20 Скачать руководство пользователя

Страница: 8 / 45

Fatigue Technology Inc.

401 Andover Park East

Seattle, WA • USA 98188-7605

Tel: (206)246-2010

Fax: (206)244-9886

49050-REV M

9. Hoses must not come in contact with toxic materials, such as creosote-impregnated objects and some paints.

Keep clean and never paint couplers or hoses. Hose deterioration due to chemical degradation may cause the

hose to fail under pressure.

10.

DO NOT exceed the hydraulic pressure (psi) rating recommended or tamper with the internal high-pressure

relief valve. Creating pressure beyond rated capacities may result in personal injury and/or damage to the

PowerPak.

11.

DO NOT exceed the recommended air pressure of 90 to 120 psi (6.2 to 8.3 bar).

12.

Before operating the pump, tighten all hose connections using the proper tools. Do not overtighten the

connections. Connections need only be tightened securely and leak-free. Overtightening may cause premature

thread failure, or high-pressure fittings to split at pressures lower than their rated capacities.

13.

Periodically pump clean oil through the entire length of the hose, then pressurize the hose and check for leaks

at the crimped connectors, between the hose material and the fitting, and between the fitting and coupler.

14.

Before replenishing the oil level, retract all cylinders to prevent overfilling the pump reservoir. Overfilling

may cause personal injury due to excess reservoir pressure created when the cylinders are retracted.

15.

Do not use the hose to move attached equipment

. Stress may damage the hose and cause personal injury.

16.

DO NOT use in potentially explosive atmospheres.

IMPORTANT

: FTI completed a risk assessment on this unit at our factory. Any modifications done by a third

party or the final user are excluded from that risk assessment. As a result, modifications done by a third party or the

final user nullify the CE marking.

Содержание FTI FT-20














































Результаты поиска

Содержание FTI FT-20

Отзывы:

Похожие инструкции для FTI FT-20

Бренды по названию

Популярные бренды

PCC FTI FT-20, Руководство по эксплуатации, техническому обслуживанию и ремонту

Результаты поиска

Содержание FTI FT-20

Отзывы:

Похожие инструкции для FTI FT-20

Бренды по названию

Популярные бренды