Chapter 3
Serial Port2 Mode
Use this item to allocate the resources of the
second serial port. Under Normal, the
resources are allocated to the onboard serial
port. Under ASKIR or IrDA, the resources are
allocated to the onboard IR port,
IR Duplex
Use this item to define if the optional infrared
port is full-duplex or half-duplex.
Onboard Parallel
Port
Use this item to enable or disable the onboard
parallel port LPT1, and to assign a port address
Parallel Port Mode
Use this item to determine the parallel port
mode. You can select Normal, ECP (Extended
Capabilities Port), EPP (Enhanced Parallel
Port), or ECP + EPP.
Parallel Port IRQ
Use this item to assign an IRQ to the parallel
port.
Parallel Port DMA
Use this item to assign a DMA channel to the
parallel port.
Onboard IDE
Use this item to enable or disable either of the
two onboard IDE channels, Primary or
Secondary.
Hardware Monitor & CPU PnP Setup Page
This page lets you set the parameters for hardware monitoring and
manually or automatically configure the mainboard for the CPU.
37
