Chapter 2
Note:
You cannot use the J2 digital audio in connector if
you have already used the SPDIF1 digital audio in/out
connector to connect to a digital audio extension bracket.
Expansion Slots
This mainboard has one AGP slot, three 32-bit PCI expansion
slots, and one 8/16-bit ISA slot. The first PCI slot (PCI1) is shared
with the ISA slot (ISA1). This means that you can use either one of
these slots but you cannot use both slots at the same time.
Follow the steps below to install an add-in card into one of the
slots.
1. Determine which slot you need to use. The table below shows
the functions of the slots.
AGP
AGP stands for Accelerated Graphics Port.
Use this slot to install a graphics adapter which
has an AGP edge connector.
PCI
PCI stands for Peripheral Components
Interconnect. Use this slot to install current
add-in cards which have a 32-bit PCI edge
connector.
ISA
ISA stands for Industry Standard Architecture.
Use this slot to install older, legacy add-in
cards which have an 8/16-bit ISA edge
connector.
2. Locate the ISA or PCI or AGP slot on the mainboard.
24
ISA1
PCI1
PCI2
PCI3
AGP