Install Other Devices
1. On the mainboard, locate the J7 ATX header for this bracket.
2. Plug the cable from the bracket into the J7 ATX header.
3. In the system chassis, remove a blanking plate from one of the
expansion slots and install the extension bracket in the slot.
Use the screw that held the blanking plate in place to secure
the extension bracket.
Digital Audio Extension Bracket
This bracket has two RCA jacks for digital audio in and digital
audio out, and an auxiliary jack for a Stereo Line-in device.
1. On the mainboard, locate the J1 SPDIF header for this bracket.
2. Plug the cable from the bracket into the J1 SPDIF header.
3. In the system chassis, remove a blanking plate from one of the
expansion slots and install the extension bracket in the slot.
Use the screw that held the blanking plate in place to secure
the extension bracket.
Note:
If you install the Digital Audio Extension Bracket, you
cannot use the internal digital audio in header J2. (See
Internal Sound Connections later in this chapter).
21
Stereo Line-in
SPDIF In
SPDIF Out
Digital Audio
Extension Bracket
1
J1-SPDIF Header
J2-Digital Audio In
