PC Chips M756T, Руководство пользователя

Страница: 16 / 43

Mainboard User’s Manual
12
Install Memory
The mainboard has two DIMM sockets for system memory
modules. You must install at least one memory module in order to
use the mainboard.
You must install the first memory module in the DIMM1 socket
to provide shared memory to the onboard VGA display
circuitry.
For this mainboard, you must use 168-pin, 3.3V unbuffered
SDRAM memory modules. If the installed CPU uses a 100MHz
system bus, you must use PC100 or PC133 memory. If the installed
CPU uses a 66MHz system bus, you must use PC66 memory. You
can install any size memory module from 16 MB to 512MB, so the
maximum memory size is 2 x 512MB = 1GB.
The edge connectors on the memory modules have cut outs, which
coincide with spacers in the DIMM sockets so that memory
modules can only be installed in the correct orientation.
To install a module, push the retaining latches at either end of the
socket outwards. Position the memory module correctly and insert
it into the DIMM socket. Press the module down into the socket so
that the retaining latches rotate up and secure the module in place
by fitting into notches on the edge of the module.
DIMM1
DIMM2