Mainboard User’s Manual
10
Installing a Slot-1 Processor Cartridge CPU
1. Locate Slo t-1 and FAN1 on the mainboard.
2. The Slot-1 is installed with a retention module. The upright
arms of the module are folded down for shipping. Raise the
arms so that they are in the upright position.
3. Slide the CPU cartridge into the module arms. Follow the
instructions that come with the CPU. The edge connector on
the CPU cartridge has a notch so that it only fits into the Slot-1
in the correct way.
4. Locate the cooling fan power supply FAN1. Connect the cable
from the processor cartridge cooling fan to FAN1.
5. On this mainboard, you can configure the processor by entering
the correct settings in the BIOS setup utility.
Slot-1 has pre-installed retention
module. The upright arms are
folded down for shipping.
FAN1
Содержание M756T
Страница 4: ...Mainboard User s Manual IV...