PC Chips M756T, Руководство пользователя

Страница: 15 / 43

1: Introduction
11
Installing a Socket-370 Processor
A PPGA/FCPGA processor install into the ZIF (Zero Insertion
Force) Socket-370 on the mainboard.
1. Locate the Socket-370 and FAN1. Pull the locking lever out
slightly from the socket and raise it to the upright position.
2. On the processor, identify the Pin-1 corner by its beveled edge.
3. On the Socket-370, identify the Pin-1 corner. The Pin-1 corner
is at the end of the locking lever when it is locked.
4. Match the Pin-1 corners and insert the processor into the
socket. No force is required and the processor should drop into
place freely.
5. Swing the locking lever down and hook it under the catch on
the side of the socket. This secures the CPU in the socket.
6. All PPGA/FCPGA processors should be installed with a
combination heatsink/cooling fan, connect the cable from the
fan to the CPU fan power connector FAN1.
Pin-1 Corner
Socket-370
FAN1