PC Chips M756T, Руководство пользователя

Страница: 23 / 43

1: Introduction
19
If you want to install more IDE devices, you can purchase a second
IDE cable and connect one or two devices to the Secondary IDE
channel connector
IDE2 on the mainboard. If you have two devices
on the cable, one must be Master and one must be Slave.
Internal Sound Connections
If you have installed a CD-ROM drive or DVD-ROM drive, you
can connect the drive audio cable to the onboard sound system.
On the mainboard, locate the two 4-pin connectors
CD1 and CD2 .
There are two kinds of connector because different brands of CD-
ROM drive have different kinds of audio cable connectors. Connect
the cable to the appropriate connector.
If you have installed a secondary CD-ROM drive or DVD-ROM
drive, you can connect the drive audio cable to the onboard sound
system. On the mainboard, locate the 4-pin Aux-In header
AUX1 ,
connect the cable to the connector.
Infrared Port
You can connect an infrared port to the mainboard. You can
purchase this option from third-party vendors.
1. Locate the infrared port IR header on the mainboard.
2. If you are adding an infrared port, connect the ribbon cable
from the port to the IR header and then secure the port to an
appropriate place in your system chassis.
1
IR Header
CD1
CD2
1
AUX1
L 1
GND 2 GND 3
R 4