Note:
Some of the power management routines are not
functional if you have connected the mainboard to an AT
power supply, rather than an ATX power supply.
Power
Management/APM
Use this item to enable or disable the power
management routines. If you enable the power
management, you can use the items below to
set the power management operation.
Green Monitor
Power State
This item defines which power-saving mode is
required to trigger the power management
operations of a green monitor.
Video Power Down
Mode
This item defines which power-saving mode is
required to power down the monitor.
Hard Disk Power
Down Mode
This item defines which power-saving mode is
required to power down the hard disk drive.
Standby Time Out
(Minute)
This sets the timeout for standby mode in
minutes. If the time selected passes without any
system activity, the computer will enter the
power-saving standby mode.
Suspend Time Out
(Minute)
This sets the timeout for suspend mode in
minutes. If the time selected passes without any
system activity, the computer will enter the
power-saving suspend mode.
Modem Use IRQ
This sets an interrupt request line to assign to
the modem. We recommend that you set this
value to N/A.
Monitor items
If you set these items to monitor, any activity on
the devices will reset the timers for the power-
saving timeouts.
Power Button
Function
This item allows you to define a software power
off using the power button. If the value is set to
Soft Off, the power button will automatically
cause a software power off. If the value is set to
Suspend, the power button will automatically
cause the power-saving suspend mode.
Restore on
AC/Power Loss
Use this item to set a system power state when
power restores after sudden AC power loss.
Ring Resume
From Soft Off
If you enable this item, incoming calls to the
fax/modem can resume the system from a
power-saving mode or a software power down.
RTC Alarm
If you enable this item you can set an alarm on
Содержание M726MRT
Страница 48: ......