Pazzles Inspiration Vue, Быстрый старт

Страница: 25 / 33

25
The load/unload button should be flashing. Insert your mat with the
calibration sheet on it into the mat loading area, being careful to slide
the mat under the mat securing tabs.
While gently holding the mat against the rollers, press the load/unload
button.
The calibration process will start. After performing a series of mea-
surements, the Inspiration Vūe
™
will attempt to cut a line directly on top
of the vertical line in the upper right hand corner.
Examine the cut line. If it does not line up with the printed line, press the
arrow button on the Inspiration Vūe
™
which cooresponds with the direc-
tion that the cut line needs to move in order to be centered in the printed
line. Repeat this step until the cut line is centered in the printed line.
When the cut line is centered in the printed line, press the repeat
button.
This process will be repeated for the vertical lines on the left hand side
of the page and the horizontal lines at the top and bottom of the page.
When calibration is complete, the mat will be ejected. Turn off the
Inspiration Vūe
™
.
Repeat the process as necessary in order to ensure the best print & cut
results.
Tip: Printing the calibration sheet on the same material you will be
cutting will enhance accuracy.