Pavilion GHQ-C3201WX-FF PB US, Руководство пользователя

Страница: 6 / 44

6
Important Safety Information
-
3
Keep the area around the unit clean.
If boxes, weeds, cobwebs, cockroaches etc. are in
the vicinity of the unit, damage or fire can result.
Do not install the equipment where the
exhaust will blow on walls or windows.
Problems resulting from scale formation
are not covered by the warranty.
Check ignition during use and extinction
after use.
Do not use parts other than those specified
for this equipment.
Do not drink water that has been inside the
unit for an extended period of time. Do not
drink the first use of hot water from the
unit in the morning.
Clean the filter on the water inlet as
frequently as required by the quality of
your local water.
If the water supply is in excess of 12 grains
per gallon (200 mg/L) of hardness, acidic
or otherwise impure, treat the water with
approved methods in order to ensure full
warranty coverage. ( page 31)
Do not run water through the unit when the
unit is not on.
When discharging hot water, make sure the unit is ON.
If water is run through the unit with the unit
OFF, water may condense inside the unit and cause
incomplete combustion or damage to the internal
electrical components.
For single-handle fixtures, you’d turn the handle to
the left.
This appliance is configured for installations
up to 2,000 ft above sea level without
changes.
For installations above 2,000 ft (610 m) above
sea levels, contact Pavilion Customer Center for
guidance.
Take necessary measures to prevent
freezing of water and leakage of gas when
leaving the unit unused for long periods of
time. ( page 26)
If it is snowing, check the flue terminal for
blockage.
Do not use the unit in high humidity place.
If the unit is used in a place with high humidity, the
inside of the unit and/or the unit may condensate
and cause incomplete combustion, damage to the
electrical components or electric leakage.
Do not disassemble the Operation Display.
Do not use benzene, oil or fat detergents
to clean the Operation Display.
This may cause deformation.
Do not get the Operation Display wet.
It is not water resistant, water can cause damage.
Do not splash water on the Operation
Display. Do not expose the Operation Display
to steam.
Do not locate the Operation Display near stoves or
ovens, this may cause damage or failure.
Preventing damage from freezing
( page 24)
Damage can occur from frozen water within the
device and pipes even in warm environments.
Be sure to read below for appropriate measures.
Repairs for damage caused by freezing are not
covered by the warranty.
CAUTION