3
Installing the Mold Plate Guard
Loosen Guard Bolts on the Hopper
and the rear post. Place Mold Plate
Guard under the washers located
under the bolt heads. Tighten bolts
using the provided Speed Driver.
To activate the interlock, slide push
rod into the plunger, inside the
keylatch, and turn rod to the right.
This will lock the push rod in place
and activate the interlock.
Installing the Feed Tray
Place stainless steel tube of Feed
Tray over the Hopper. Make sure
the Plunger on the bottom of Feed
Tray depresses the Tower Stem
inside the Tower Sleeve.
Installing Machine onto Riser
Platform
Place machine on the riser platform
making sure the 4 legs of the
machine go into the 4 leg wells on
the Riser Platform. The Picture
shown shows the front view of the
Riser Platform.
Leg Wells
Thank you and congratulations on the purchase of your new Model PS21 Patty Molding Machine from
Patty-O-Matic, Inc! The Model PS21 will form, interleave paper between, and stack patties. This machine is
designed for easy operation and cleaning. Please become familiar with this manual and your machine will
give you many years of service.
The Model PS21 is shipped to you in at least three cartons which contain the patty machine, feed tray,
mold plate guard, spare parts box, receiving table, riser platform, and the manual. If you purchased your
machine with any other accessories, such as a mobile table or patty paper, these items may be in a separate
carton.
Your machine is equipped with two interlocks. One is located on the front of the machine and one is
located on the top of the machine. The Mold Plate Guard must be installed on the machine to engage the
interlock on the front of the machine and the Feed Tray including the guard must be installed on top of the
Hopper to engage the interlock on top of the machine.
Guard Bolts
Interlock Tower
Push Rod &
Round Keylatch
Plunger located
on back of Tray
If you have any questions or concerns after reading these
instructions, please do not hesitate to contact the factory at:
732-938-2757 or [email protected]
Feed Tray
Feed Tray
Guard
