Accessing the CLI task list
55
CopperLink CL2300 User Manual
7
• Accessing the CLI
Mode:
Administrator or operator execution
Step
Command
Purpose
1
Trinity(cfc)#
who
Shows more detailed information about the users ID, name, state, idle time
and location
or
Trinity>
who
Shows the user login identity
Example:
Checking identity and connected users
The following example shows how to report who is logged in or more detailed information about users,
depending on the execution mode in which you are working.
Used in administrator execution mode:
Trinity(cfg)#who
# User Name Login Time Location
0 admin 01/01/2000 00:08:59 console
1 admin 01/01/2000 00:11:36 telnet 172.16.54.135:55404
Used in operator execution mode:
Trinity>who
You are operator support
Command index numbers
A command index number (indicated by the boldface
1
,
2
, and
3
index numbers in the example below) indi-
cates the position of a command in a list of commands (that is, a command with index
1
will appear higher in
the configuration file than one with index
3
).
192.168.1.1(pf-voip)[default]#
show running-config
...
profile voip default
codec
1
g711ulaw64k rx-length 20 tx-length 20
codec
2
g711alaw64k rx-length 20 tx-length 20
codec
3
g723-6k3 rx-length 30 tx-length 30
dejitter-max-delay 200
...
Commands that make use of index numbers always show the index in the running config. However, the index
can be omitted when entering the command. If you enter such a command with an index, it is inserted into list
at the position defined by the index. If you enter such a command without an index, it is placed at the bottom
of the list. Also, you can change a commands position in a listing (moving it up or down in the list) by chang-
ing its index number.
Example 1:
Moving the G.723 codec from position
3
in the list to position
1
at the top of the list.
Listing before changing the G.723 codec index number:
profile voip default
codec 1 g711ulaw64k rx-length 20 tx-length 20
codec 2 g711alaw64k rx-length 20 tx-length 20