Administration Options
60
Model 3202 Getting Started Guide
4 • Web configuration
A configuration of
0.0.0.0
will allow all hosts on Internet or LAN to access the Model 3202. If you leave the
trusted host list completely blank, you will block all PCs on the WAN from accessing the Model 3202. On the
other hand, only PCs in the LAN can access the Model 3202. If you type the exact IP address in the filed, only
that host can access the Model 3202.
Click
Finish
to commit your changes. The browser will prompt the configured parameters and check it before
writing into NVRAM. Press
Restart
to reboot the Model 3202 with the new settings. Click
Continue
to con-
figure other options.
SNMP Administration
Simple Network Management Protocol (SNMP) provides for the exchange of messages between a network
management client and a network management agent for remote management of network nodes. These mes-
sages contain requests to get and set variables that exist in network nodes in order to obtain statistics, set con-
figuration parameters, and monitor network events. SNMP communications can occur over the LAN or WAN
connection.
The Model 3202 can generate SNMP traps to indicate alarm conditions, and it relies on SNMP community
strings to implement SNMP security. This Model 3202 support both MIB I and MIB II.
Click
SNMP
in the
Administration
menu to set up the parameters.
Figure 40. SNMP Administration page
