Reboot Command
89
Model 3202 Getting Started Guide
5 • Console and Telnet configuration
Reboot Command
The
reboot
command restarts the Model 3202. Move the cursor “
>>
” to
reboot
in the main menu and press
Enter.
----------------------------------------------------------------------
Command: reboot <CR>
Message: Please input the following information.
Do you want to reboot? (y/n): y
----------------------------------------------------------------------
Type “
y
” to begin the reboot process.
Ping Command
The
ping
command checks the connection of the Model 3202 to the network. Move the cursor “
>>
” to
ping
in the main menu and press Enter.
The
ping
command sends an echo request packet to an address, and then waits for reply. The ping output can
help you evaluate path-to-host reliability, delays over the path, and whether the host can be reached or is func-
tioning correctly.
----------------------------------------------------------------------
Command: ping <ip> [1~65534|-t] [1~1999]
Message: Please input the following information.
IP address <IP> : 10.0.0.1
Number of ping request packets to send (TAB select): -t
Data size [1~1999]: 32
----------------------------------------------------------------------
There are 3 parameters for the
ping
command:
•
IP address:
Enter the IP address that you want to ping.
•
Number of ping request packed to send:
Use the TAB key to select the following options.
-
Default:
Sends 4 packets only
-
1~65534:
Sets the number of ping request packets from 1 to 65534
-
-t :
Results run continuously until you press the Ctrl key to stop the process
•
Data Size:
Select from 1 to 1999
