Autonomous Alarm Messages
48
OnSite Series Getting Started Guide
4 • System Management Access
To remove an existing SNMP trap receiver, follow these steps:
1.
Select a trap receiver on the
SNMP Trap Receivers
page.
2.
Click on
Delete
to remove the trap receiver.
At this point, the system removes the trap receiver, and it is no longer displayed in the table.
In addition to supporting the generation of traps to an SNMP-based NMS, the system also sends autonomous
messages to all connected OnSight NMSs. The OnSight NMS provides centralized management and control
of OS-10 systems in point-to-point, linear, and ring ADM subnetworks.
To display the OnSight NMS servers authorized to manage the OS-10 system, see
Figure 19
and follow these
steps:
1.
Select the
SYSTEM
folder from the navigation menu.
2.
From the expanded
SYSTEM
folder, select
Management Access
.
3.
From the expanded
Management Access
folder, select
NMS
.
On the
Authorized NMS Servers
page, the table displays the IP addresses of the OnSight NMS servers autho-
rized for management connectivity to the system.
To add an OnSight NMS server to the list of authorized servers, see
Figure 19
and follow these steps:
1.
On the
Authorized NMS Servers
page, click on
Add
.
2.
In the
Add Authorized NMS Server
window, type the
NMS IP Address
and click on
Apply
.
3.
Click on
Close
to close the window.
Figure 19. Configuring an Authorized OnSight NMS Server
Содержание OnSite 07MOS10xx-GS
Страница 14: ...14 Chapter 1 Product Overview Chapter contents Introduction 15 OnSite Platforms 15...
Страница 18: ...18 Chapter 2 Application Overview Chapter contents OS1052 Application 19 OS1063 Application 21...
Страница 63: ...63 Appendix C Terms and Acronyms Chapter contents Abbreviations 64...