Patton electronics ForeSight 6100 Element Management System, Руководство пользователя

Страница: 65 / 70

The Node 63
ForeSight 6100 EMS User Guide 8 • Tree structure reference
• Prompt (No Push) —This setting disables ForeSight 6100’s ability to perform a push operation. It simply
notifies a user that an ACP situation has been detected. The user must then take the appropriate steps to
install a new configuration on the changed node.
• Ignore —This setting disables ACP completely. If a situation occurs that would normally have been
detected by the ACP function, the ForeSight 6100 user must detect it unaided and then take the appropri-
ate steps to install a new configuration on the changed node
• Use Global Option —When this option is set, the global ACP settings are in effect (see “Auto-Config Push
(ACP) options” on page 40 for details about global settings).
Configuration. This defines the configuration that the 6100 should use for an ACP to this device. The default
is to Use Newest, which will cause the ForeSight 6100 to push the most current configuration file. If no config-
uration exists for a node, the 6100 EMS will be unable to ACP.
Configurations are downloaded directly from the managed device. Getting, setting, and deleting configura-
tions is done in the Configuration tab (see section
“Configuration” on page 60). The ACP configuration selec-
tion is driven by the list of stored configuration, which is shown in the Configuration tab.