EnviroNET Model 2168
28
EnviroNET User Manual
3 • Configuring the EnviroNET
Configuring DIP Switch S1
DIP switch S1 is where you configure the CopperLink line rate, symmetric or asymmetric, Ethernet full auto
negotiation capability (100Base-T full or half duplex, 10Base-T full or half duplex) or limited auto sense (only
100Base-T half duplex, 10Base-T full or half duplex)
.
Figure 12. EnviroNET 2168 Dip Switch Settings
Table 10. S1 Summary
Position
Description
S1-1
Ethernet Auto Sense
S1-2
Line Rate
S1-3
Line Rate
S1-4
Line Rate
S1-5
Reserved
S1-6
Reserved
S1-7
Reserved
S1-8
Reserved
1 2 3 4
ON
Push toggle up
for ON position
Switch toggle
Push toggle
down for
OFF position
1
2
3
4
ON
S1
S1
5 6 7 8
5
6
7
8
Ethernet
Auto Sense
Line Rate
Reserved
