background image

 

6

 

EnviroNET User Manual 

 

About this guide

 

Precautions

 

Notes, cautions, and warnings, which have the following meanings, are used throughout this guide to help you 
become aware of potential problems. 

 

Warnings

 

 are intended to prevent safety hazards that could result in per-

sonal injury. 

 

Cautions

 

 

 

are intended to prevent situations that could result in property damage or 

impaired functioning.

 

Note

 

A note presents additional information or interesting sidelights.

 

The alert symbol and IMPORTANT heading calls attention to 
important information.

The alert symbol and CAUTION heading indicate a potential 
hazard. Strictly follow the instructions to avoid 
property damage.

The shock hazard symbol and CAUTION heading indicate a 
potential electric shock hazard. Strictly follow the instructions to 
avoid property damage caused by electric shock.

 

The alert symbol and WARNING heading indicate a potential safety hazard. 
Strictly follow the warning instructions to avoid personal injury.

The shock hazard symbol and WARNING heading indicate a potential electric 
shock hazard. Strictly follow the warning instructions to avoid injury caused 
by electric shock.

Содержание EnviroNET 2100 Series












































Отзывы: