Administration Command Menu
99
Model 2160 Series User Manual
5 • Console and Telnet configuration
You can set up the following options:
•
Version:
Set to
Disable
,
Version 1
or
Version 2
.
•
Trap host IP address:
Enter the dtrap host IP address.
•
Community:
Enter the community password.
Use the
list
command to view all SNMP trap host entries.
Supervisor Password and ID
The supervisor ID and password is the last option in the
security
command menu, but it is the most important
menu item. Users who access the Model 2160 via a web browser or console/Telnet must use the supervisor ID
and password to configure the Model 2160. You should change the supervisor ID and password after initial
configuration.
Supervisor Password
To change the supervisor password, move the cursor “
>>
” to
passwd
in the
security
menu and press Enter.
The default password is
root
.
----------------------------------------------------------------------
Command: admin passwd <pass_conf>
Message: Please input the following information.
Input old Supervisor password: ****
Input new Supervisor password: ********
Re-type Supervisor password: ********
----------------------------------------------------------------------
Supervisor ID
To change the supervisor ID, move the cursor “
>>
” to
id
in the
security
menu and press Enter.
The default ID is
root
.
-----------------------------------------------------------------------------
Command: admin id <name>
Message: Please input the following information.
Legal user name (ENTER for default) <root>:
-----------------------------------------------------------------------------
Figure 47
on page 62 shows a flowchart of user access functions using the web browser or console/Telnet.
ID
Password
Web Browser
•
•
Telnet/Console
•
