Advanced Configuration Options
41
Model 2160 Series User Manual
4 • Web configuration
Advanced Configuration Options
This section contains information for setting up advanced options for the Model 2160 via the WMI. Advanced
setup contains Model 2160 Line, VLAN, QoS and Rate Control parameters.
Note
The advanced functions are only intended for administrators to set
up. The incorrect advanced settings will affect the performance of the
Model 2160 or cause system errors and disconnection.
LINE
Click on
LINE
under
Advanced
on the main menu to reach the LINE advanced configuration page. You can
setup the
Line Type
(number of wires),
Annex Type
,
TCPAM Type
,
Main Rate
,
SNR Margin
, and
Line Probe
settings for LINE parameters.
Figure 13. LINE page
Line Type
Select the line type for your model from the
Link
drop-down
list. Line type means how many wires you want
to use on the line side. For example, you can select 2-wire, 4-wire or 8-wire line type for the 8-wire model.
Annex Type
Select the appropriate
Annex
type from the drop-down list.
Annex AF
describes the transmission and perfor-
mance requirements for North America.
Annex BG
describes performance and transmission requirements for
Europe.
Table 7. Line Type Chart
Line Type
2-wire
4-wire
8-wire
Model
Type
2160 2-wire model
•
2161 4-wire model
•
•
2162 8-wire model
•
•
•
