manualshive.com logo in svg

Patton electronics 3092, Справочное руководство администратора

"Nova 3092" - это инновационный продукт, который имеет большое количество функций. Скачайте бесплатное Руководство пользователя для "Nova 3092" на нашем ресурсе сегодня. Получите всю необходимую информацию для правильного использования этого устройства. Скачать Руководство пользователя можно на manualshive.com.

Поделиться
Скачать
background image

  

57

    "# 

8 • Ethernet

ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance 
of the dot3StatsMultipleCollisionFrames object."

Multiple Collision Frames (dot3StatsMultipleCollisionFrames)

The number of successfully transmitted frames for  which transmission is inhibited by  more than one colli-
sion.  A frame that is counted by an instance of this object is also counted by the corresponding instance of 
either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the correspond-
ing instance of the dot3StatsSingleCollisionFrames object."

SQE Test Errors (dot3StatsSQETestErrors)

A count of  times that the SQE TEST ERROR message is generated by the PLS sublayer.  The SQE TEST 
ERROR message is defined in section 7.2.2.2.4 of ANSI/IEEE 802.3-1985 and its generation is described in 
section 7.2.4.6 of the same document."

Deferred Transmissions (dot3StatsDeferredTransmissions)

The number of times for  which the first transmission attempt is delayed because the medium is busy. This 
number does not include frames involved in collisions.

Late Collisions (dot3StatsLateCollisions)

The number of times that a collision is detected later than 512 bit-times into the transmission of a packet. Five 
hundred and twelve bit-times corresponds to 51.2 microseconds on a 10 Mbps system.  A (late) collision 
included in a count of late collisions is also considered as a (generic) collision for purposes of other collision-
related statistics.

Excessive Collisions (dot3StatsExcessiveCollisions)

The number of frames in which transmission failed due to excessive collisions.

Other Errors (dot3StatsInternalMacTransmitErrors)

The number of frames for which transmission fails due to an internal MAC sublayer transmit error.  A frame is 
only counted if it is not counted by the corresponding instance of either the dot3StatsLateCollisions object, 
the dot3StatsExcessiveCollisions object, or the dot3StatsCarrierSenseErrors object.  The precise meaning of the 
count represented by an instance of this object is implementation-specific.  In particular, an instance of this 
object may represent a count of transmission errors on a particular interface that are not otherwise counted.

Carrier Sense Errors (dot3StatsCarrierSenseErrors)

The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a 
frame.  The is incremented at most once per transmission attempt, even if the carrier sense condition fluctuates 
during a transmission attempt."

Received Frames Too Long (dot3StatsFrameTooLongs)

The number of frames received that exceed the maximum permitted frame size.  The count is incremented 
when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received 
frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Man-
agement, counted exclusively according to the error status presented to the LLC."

Содержание 3092



































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 3092

Aaeon UP Squared 6000 Edge Computing Kit User Manual preview
UP Squared 6000 Edge Computing Kit
Бренд: Aaeon Страницы: 59
Hama 53107 Operating Instruction preview
53107
Бренд: Hama Страницы: 10
Javad TRIUMPH-3NR User Manual preview
TRIUMPH-3NR
Бренд: Javad Страницы: 35
Accusys ACS-76500 Owner'S Manual preview
ACS-76500
Бренд: Accusys Страницы: 34
Lucent Technologies PARTNER Voice Messaging PC Card Release 2 Installation And Programming preview
PARTNER Voice Messaging PC Card Release 2
Бренд: Lucent Technologies Страницы: 67
Zoom B9.1ut Operation Manual preview
B9.1ut
Бренд: Zoom Страницы: 88
Lanner ICS-P570 User Manual preview
ICS-P570
Бренд: Lanner Страницы: 63
E-TOP PR126g User Manual preview
PR126g
Бренд: E-TOP Страницы: 24
Intellinet 561051 Quick Install Manual preview
561051
Бренд: Intellinet Страницы: 12
Mitsubishi 32172 User Manual preview
32172
Бренд: Mitsubishi Страницы: 874
Mellanox Technologies ConnectX 3 Pro User Manual preview
ConnectX 3 Pro
Бренд: Mellanox Technologies Страницы: 57
AMX NXA-ENET8POE Installation Manual preview
NXA-ENET8POE
Бренд: AMX Страницы: 2
QNAP Turbo NAS TVS-71 Series Hardware User Manual preview
Turbo NAS TVS-71 Series
Бренд: QNAP Страницы: 51
Longshine LCS-8170 User Manual preview
LCS-8170
Бренд: Longshine Страницы: 35
ZyXEL Communications P-335U Specifications preview
P-335U
Бренд: ZyXEL Communications Страницы: 2
Renesas R0E001000ACB00 User Manual preview
R0E001000ACB00
Бренд: Renesas Страницы: 4
Logicube ZCLONE User Manual preview
ZCLONE
Бренд: Logicube Страницы: 56
ST X-NUCLEO-EEPRMA1 User Manual preview
X-NUCLEO-EEPRMA1
Бренд: ST Страницы: 22

Бренды по названию

Популярные бренды

Загрузить еще бренды