manualshive.com logo in svg

Patton electronics 29XX Series, Справочное руководство администратора

Поделиться
Скачать
Patton electronics 29XX Series Скачать руководство пользователя страница 236

System main window

236

Access Server Administrators’ Reference Guide 

20 • System

Physical Location (sysLocation)

The physical location of this node (e.g., 

telephone closet, 3rd floor

), as defined in RFC 1213.

System Services (sysServices)

A value which indicates the set of services that this entity primarily offers, as defined in RFC 1213.

Web Settings (boxBackgroundFlag)

The following options are available:

•

disableGraphics(0)—When this option is selected, graphics on WWW pages will not be displayed. This 
results in faster page display times.

•

enableGraphics(1)—When this option is selected, graphics on WWW pages are displayed.

•

disableWeb(2)—When this option is selected, access to the WWW pages is denied for everyone.

Monitor Privilege (boxMonitorPrivilege)

Specifies the privileges given to the monitor user. Privileges can be removed or additional write access can be 
given beyond read-only access. The following options are available:

•

none(0)—The monitor user can not log in.

•

read-only(2)—This is the default setting. The monitor user can view but not change any parameters. Mon-
itor can not view passwords.

•

writeUser(18)—The monitor user can change all parameters—except passwords— under authentication, 
drop-and-insert, and dial-in links.

•

writeUserlp(50)—The monitor user can change all parameters—except passwords— under authentication, 
drop-and-insert, dial-in, and IP links.

•

writeUserlpWan(114)—The monitor user can change all parameters—except passwords— under authenti-
cation, drop-and-insert, dial-in, IP, T1/E1, and Frame Relay links.

•

writeUserlpWanSystem(242)—The monitor user can change all parameters—except passwords— under 
authentication, drop-and-insert, dial-in, IP, T1/E1, Frame Relay, System, and System Log links.

•

writeUserlpWanSystemUpload(498)—The monitor user can change all parameters—except passwords— 
under authentication, drop-and-insert, dial-in, IP, T1/E1, Frame Relay, System, and System Log links. The 
monitor user can also load firmware updates into the access server.

Содержание 29XX Series







































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды