GB
131
Automatic overload safety
The cordless drill is equipped with an
automatic overload safety. In case of an
overload of the machine or a temperature
increase of the battery exceeding 70°C, the
overload safety automatically shuts down the
power supply until the machine has cooled
Depth discharge protection
The Li-Ion battery is protected against depth
discharge by way of an “Electronic Cell
Protection (ECP)” system. If the battery
is almost empty, the power supply will be
interrupted automatically. Please charge the
battery as described in the chapter “Charging
the Battery“.
ATTENTION! After automatic shut-down
by way of the ECP - do not use the On/Off
pressure switch.
The continued use of the on/off pressure
switch after an automatic off may cause
permanent damage to the battery.
Dear customer, our products are going under
strictly quality controls.
In case of misfunction, which are pointing
out material or manufacturing faults, please
contact your Hornbach store.
To enforce warranty claims obtains :
1. These conditions are ruling additional
warranty performances and are free of
charge.
The warranty rules given by law will remain
untouched.
2. The warranty performance is limited
on material or manufacturing faults and
the elimination of those or alternatively
exchange of the product. As our products
are not constructed for professional use, we
see the warranty contract as not valid, if the
product is used under those circumstances.
Excluded are ; warranty claims for
transportation damages, damages coming
from non-observance of the manual ( like
connection to wrong voltage or wrong
electricity ),unprofessional installation,
incorrect use( like overstressing the
product or usage of not approved tools
or accessories ), non-observance of the
of foreign objects ( like sand, stones or dust
), wrong force or man inducted events ( like
damages caused by falling down ), plus
normal accepted attrition ( like battery packs,
blades and so on ). The warranty claim
expires if intrusions were already done.
3. The warranty period is three years and
is starting with the date of purchase of the
product. warranty claims must be raised
within two weeks after realising the defect.
Warranty claims coming later are excluded.
The warranty period is neither extended
after repair or exchange nor a new warranty
period is started fort he product or possible
spare parts.
4. To enforce warranty claims contact your
Hornbach store and show your bill as an
original or another dated buying proof.
Therefore keep your receipt accurately.
Explain the reason of your claim as good as
possible. Is the defect part of our warranty
performance, you will get a repaired or new
product at once.
GB
132
VII - Warranty
VIII - Declaration of Conformity
We declare, that the product described
in
Technical Data
:
14.4V Lithium Cordless Drill/ Screwdriver PA-144BS
manufactured for:
Hornbach Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
Andreas Back
Head of Quality Management, environment & CSR Person
authorised to compile the technical file
Bornheim, 10.12.2014
Hornbach Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
is in conformity with the following directives and in accordance
to the following applicable harmonized standards:
Machinery Directive 2006/42/EC :
EN 60745-1:2009+A11
EN 60745-2-1:2010
EN 60745-2-2:2010
EMC Directive 2004/108/EC :
EN 55014-1:2006+A1+A2
EN 55014-2:1997+A1+A2
EN 61000-3-2:2006+A1+A2
EN 61000-3-3:2013
Low-Voltage Directive 2006/95/EC
(for Charger):
EN 60335-1:2012
EN 60335-2-29:2004+A2
EN 62233:2008
Содержание PA-144BS
Страница 3: ......