Pattfield Ergo Tools PE-BT25, Оригинальное руководство пользователя

Страница: 189 / 200

GB
5 Mixing and filling fuel
WARNING! This product is
not supplied with fuel in the
engine! Before operating
this product it is essential to fill in
fuel!
WARNING! Not to use
biofuels to operate this
product. Ensure that there
are no open flames around the
product! Do not smoke while
filling in fuel and oil!
1) This product is equipped with a 2-
stroke engine.
2) Mix a regular-grade unleaded
petrol and a quality motor oil for air
cooled 2 stroke engines.
3) Use an anti-oxidant added quality
oil expressly labelled for air-cooled
2 stroke engine use (JASO FC
GRADE OIL or ISO EGC GRADE).
4) Do not use BIA or TWC (2 stroke
water-cooling type) mixed oil.
5) The recommended mixing ratio
for petrol:oil is 40:1.
6) Place the product on a stable and
level surface. We recommend laying
an inflammable sheet under the
product.
7) Mix and store fuel only in an
approved petrol container (Fig.7).
8) Unscrew and remove the fuel tank
cap (Fig.8).
9) Add proper fuel. Do not overfill.
Leave approximately 5mm of space
to the lower edge for fuel expansion
(Fig.9).
10) Use proper a funnel with filter to
avoid that debris can enter the tank
and avoid splitting and overfilling
the tank.
11) Wipe up spilled fuel with a soft
cloth and refit the fuel tank cap.
12) Always dispose fuel, used oil
and objects soiled with those
according to local regulations.
6 Fitting and adjusting the harness
WARNING! Always attach
the harness when operating
the product. Do not carry it
only with your hands.
1) The harness helps the operator to
carry this product.
2) Take the harness by opening the
karabiner.
3) The harness can attached to the
upper shaft at one of the two eyelets
(Fig.10).
4) Place the harness so that is runs
over the left shoulder, crossing
breast and back. The karabiner
must be place at the right hip
(Fig.11).
5) Adjust the length of the harness
so that the hook is about 15cm
below your waist and the cutting
device is parallel to the ground
(Fig.11).