Pattfield Ergo Tools PE-BT25, Оригинальное руководство пользователя

Страница: 182 / 200

GB
o) Always ensure that all handles
and guards are fitted when using
the product. Never attempt to use
an incomplete product or one fitted
with an unauthorised modification.
p) Always use two hands to
operate a product fitted with two
handles.
q) Always be aware of your
surroundings and stay alert for
possible hazards of
which you may not be aware due to
the noise of the product.
r) Take care against injury from
any device fitted for trimming the
filament line length. After
extending new cutter line always
return the product to its normal
operating position before
switching on.
s) Always ensure that air vents are
kept clear of debris.
4) Maintenance and storage
a) When the product is stopped for
servicing, inspection or storage,
shut off the power source,
disconnect the spark plug wire
from the spark plug and make sure
all moving parts have come to a
stop. Allow the product to cool
before making any inspections,
adjustments, etc.
b) Store the product where the fuel
vapour will not reach an open
flame or spark. Always allow the
product to cool down before
storing.
c) When not in use store the
product out of the reach of
children.
d) Use only manufacturers
recommended replacement parts
and accessories.
e) When transporting or storing
the product, always fit the cutting
device transport guard.
f) Store the product in a dry, clean
place protected from direct
sunlight only after the fuel tank
has been emptied and the product
is cleaned. The product must be
stored inside only under these
conditions.
5) Fuel handling
a) Follow the maintenance and
repair instructions for this product.
Never carry out any modifications
of the product. Never change the
preset rotary speed or the engine
and product settings. Information
about maintenance and repair is
provided in this user manual.
b) Never carelessly touch the
product, you can burn yourself.
While the product is in operation
or shortly thereafter, its parts such
as the exhaust pipe, engine, and
other surfaces are extremely hot!
Pay attention to the markings on
the product.
c) Make sure that the air vents of
the combustion engine are clear.
Keep the air vents free of dust, dirt
particles, gases and fumes.