![Pattfield Ergo Tools PE-AHE 20 Li Скачать руководство пользователя страница 114](http://html1.mh-extra.com/html/pattfield-ergo-tools/pe-ahe-20-li/pe-ahe-20-li_original-instructions-manual_4016163114.webp)
EN
226
EN
227
EN
226
EN
227
At proper tension, there must be a
2-5 mm gap between chain and guide
bar, if the tool is lifted by the chain.
CHANGE SAW CHAIN
Unscrew the sprocket cover wheel
and remove the sprocket cover
.
Caution!
Make sure the tool is
switched off and the battery re-
moved.
TIGHTEN THE CHAIN
Loosen the sprocket cover wheel
Caution!
Remove battery, wear pro-
tective gloves!
Turn the chain tensioning screw
anti-clockwise, until the chain
can
be removed.
Caution!
The saw chain is very
sharp! Wear protective gloves. Dan-
ger of personal injury!
Tighten the chain and the sprocket cover
as follows.
Increase tension:
Turn chain tension-
ing screw
clockwise.
Reduce tension:
Turn chain tensioning
screw anti-clockwise.
Replace the chain
. The chain must
be freely movable on the guide bar
,
and must not have any kinks.
Caution!
When attaching the saw
chain, observe its rotation direction!
1
3
1
2
2
3
ATTACH BATTERY
Slide a charged battery
into the bat-
tery slot until it clicks into place. For
removal press the battery release but-
ton
and pull out the battery.
Caution!
Only use the batteries de-
scribed in technical data.
SWITCHING ON/OFF
(1.)
Press and hold the release switch
backwards.
(2.)
Press the on/off
switch
to switch the tool on.
Release the on/off switch to switch off.
1
2
Re-fasten the sprocket cover
with the
sprocket cover wheel
.
4
2
3
2-
5 mm
1
1
3
2
2
4
1.
2.
1
...