Four point immobilisation belt
Mounting - run the lower straps between backrest and side cushions and
secure it using cam buckles at the rear side of the backrest. (it is necessa-
ry to turn the belt to half width).
Run upper straps through appropriate in backrest and fix them using
upper cam buckles at the rear of backrest. In case that there would be
two accessories fixed in the cam buckles, run straps through cam buckle-
sonly once, otherwise run them through the buckles backwards to fix
them.
Setting and manipulation - release all three fasteners of the belt, seat the
child into the stroller and fix the clamps. Set desired straps length using
plastic attachments, so that the belt would fixate, but not throttle the
child. Other manipulation with the belt is to be made using plastic
clamps.
Two points imm. belt
fit - fix the belt in the lowest attachments at the rear of backrest (it is
necessary to turn the belt to half width)
adjust - unbrace the fastener, seat the child into the stroller and
adjust the length of the belt. To adjust the belts length use the at-
tachments at the rear of backrest. The occupant must always feel
comfortable when using the belt.
4
Chest-belt addition to 4p-belt
The chest-belt addition put on the upper (thinner) straps of the four
point belt.
Wedge of backrest
Peel off the cover of the backrest (with Velcro). Stick
the wedge of backrest to the desired height with Velcro.
Stick the cover back.
detail
Room base
Before fitting the seat to the room base study the user guide of your stroller, chapter
“Fitting the seat in the ride direction”.
Distance between front (1) and rear - adjustable (2) wheels of the base must be
sufficient for avoiding tipping the room base while using with the seat. The
footrest of the stroller must be above the front wheels of the base.
9
Extended side protection
Mounting - the extended side protection slip-over the backrest and put it on the tubes of the handle from both
sides with the aid of four plastic loops. Upper pair of loops put on between plastic girdle on the handle and the
handle knob. The lapels of the extended side protection
secure with velcro lock. Lower part of the extended side
protection secure with strings.
Seating position - in seating position it is important that
extended side protection is crossed from behind behind
the backrest and secured with strap with velcro lock, this
strap run in by plastic triangel near the upper loop and
secure with velcro lock..
Half-seating position - extended side protection secure
with the strap with velcro-lock that is run in by plastic
triangel and buttoned up with velcro-lock in the back
part.
Lying position - leave the extended side protection
freely.In case you also buy the item hood, side hood
upholstery button up the way that the hood upholstery
would be between sides of the stroller and extended side
protection.
TOM4
TOM5