H-style harness
Mounting - Run lower straps between backrest and side
cushions and run them through lower cam bucklesplaced
on the back plate of the backrest, in case that there would
be two accessories fixed in the cam buckles, run straps
through cam bucklesonly once, otherwise run them
through the buckles backwards to fix them.
Run upper straps through these holes and run them
through upper cam buckles placed on the back plate of the
backrest. In case that there would be two accessories fixed
in the cam buckles, run straps through cam buckles only
once, otherwise run them through the buckles backwards
to fix them.
Setting and manipulation - Open the buckles, fold up the
fixation. Sit the child into the stroller, put the fixation on
and secure the child using buckles. Adjust the length of the
straps with plastic clip, so that the abduction belt would
fixate, but not throttle the child. Other manipulation is to
be made using buckles.
Setting and manipulation - Open the clips, fold up the fixation. Sit the child into the stroller,
put the fixation on and secure the child using clips. Adjust the length of the strips with plastic
clip, so that the abduction belt would fixate, but not throttle the child. Other manipulation is to
be made using clips.
6
Immobilisation waistcoat
Mounting - Run side straps between backrest and side cushions. Run lower side straps through lower cam buc-
kles which are positioned on the rear plate of the backrest, in case that there would be two accessories fixed in
the cam buckles, run straps through cam bucklesonly once, otherwise run them through the buckles backwards
to fix them.
Remove, remove slider buckles from upper straps and run straps through holes in uphostery and backrest plate.
Put the buckles back on.
Setting and manipulation - Unzip the waiscoat, unlock buckles on higher straps. Sit the child into the stroller,
zip the waistcoat and lock the buckles. Adjust the length
of the straps with plastic clip, so that the abduction belt
would fixate, but not throttle the child. Other manipula-
tion is to be made using buckles
Setting and manipulation - Unzip the waiscoat, unlock
clips on higher strips. Sit the child into the stroller, zip
the waistcoat and lock the clips. Adjust the length of the
strips with plastic clip, so that the abduction belt would
fixate, but not throttle the child. Other manipulation is
to be made using clips.
detail
detail
Rain cover
The rain cover should be pulled over the stroller, so the hood and also
the footrest would be covered. Store clean and dry.
Abduction belt
Mounting - Run the straps with velcro through these holes
(TOM: run straps with velcro through the gap between the bac-
krest upholstery and seat). Lace the straps behind the back tube
of the seat and secure using velcro.
Run upper thinner straps between backrest and side cushions
and secure with upper cam buckles placed on the back plate of
the backrest. In case that there would be two accessories fixed in
the cam buckles, run straps through cam bucklesonly once,
otherwise run them through the buckles backwards to fix them.
Setting and manipulation - Open the buckles and sit the baby
into the stroller. Fasten the buckles. Adjust the length of the
straps with plastic clip, so that the abduction belt would fixate,
but not throttle the child. Other manipulation is to be made only
using plastic buckles.
7
Padded frame cover
Attach the cover over the handle tube and over the handle fold-
ing release with the dry zipper.
FlexiPads
The set of six different cush-
ions enable the seat width
adjustments according the
occupant’s needs.