1 Characteristic
• PWM or ON/OFF series battery charging
• state of charge (SOC) battery regulation
• battery Ah setting, boost charging, equalizing charging, float charging
• automatic load reconnection, manual load switch
• automatic selection of voltage (12 V / 24 V) • temperature compensation
• lighting control and timer setting options during nighttime(for type –T)
EPIP-40 SERIES SOLAR CHARGE CONTROLLER
• LCD display: SOC as a fuel gauge, all system parameters in digital value, system
status as symbols
─
for solar PV system
• full circuit protection, electronic fuse • field adjustable parameters by four buttons
2 Controller panel instructions
INSTRUCTION MANUAL
Customer service
：
86-10-82894856
，
82894896
Terminal board
LCD digital and figure display
4 key setting
3Installation:
Connect the individual components to the symbols provided, they are solar panel,
battery and loads in order. Only install the regulator near the battery on a suitable
surface. This surface should be solid, stabile, even, dry and nonflammable. The battery
cable should be as short as possible (1-2 m) and have a suitable cable diameter
size to minimize loss, e.g. use 2.5 mm² at 10 A and 2 m length; 4 mm² at
20 A and 2m length; 6 mm² at 30 A and 2 m length.
