Patriot EH0650, Руководство пользователя

Страница: 32 / 34

CARE , MAINTENANCE AND STORAGE
Warning! Risk of injury! Before performing any operation unplug the power cord from the
wall socket.
Warning: Other maintenance and repair work than those listed in this manual, must only be
performed by an authorized manufacturer's service. When the cable is damaged it may only
be replaced by an authorized manufacturer’s service. Safety and operational reliability can
only be guaranteed when using original spare parts.
T he power tool is almost maintenance - free
• Keep the power tool and the air vents clean and unplugged.
• Make sure that no moisture reaches the inside of the power tool during cleaning .
• Service repair consists of replacing worn carbon brushes only or drive belt (contact your seller or a
qualified electrician) .
Cleaning
• Clean the power tool after every use. Remove dust, shavings, splinters, etc . with a brush or
compressed air if necessary.
• Clean the power tool with a wet cloth. Do not use cleaning agents or solutions; these can corrode the
plastic parts of the power tool.
Storage
• Keep the tool in a dry and safe place.
TROUBLESHOOTING
Problem Possible cause Solution
Planer does not work
Mains socket is not live
Check mains socket and/or
circuit breaker/RCD
Power cable fault
Check whether power cable is
disconnected or damaged
Unsatisfactory cut Blunt blades
Use opposite edges of blades
and re - adjust
Vibrations are too strong
Unbalanced planing head due to
b lades not adjusted properly or
loose
C heck and re - adjust blades
properly
Motor overheated
Overload due to excessive
pressure to cut
Allow the motor to cool down
by running the tool idle for
3 minutes
32