4. Power tool use and care
a)
Do not force the power tool. Use the correct power tool for your application.
The correct power
tool will do the job better and safer at the rate for which it was designed.
b)
Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c)
Disconnect the plug from the power source and/or the battery pack from
the power tool before
making any adjustments, changing accessories, or storing power tools.
Such preventive safety
measures reduce the risk of starting the power tool accidentally.
d)
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands
of untrained users.
e)
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and
any other condition
that may affect the power tool’s operation. If damaged, have the power tool
repaired before use.
Many accidents are caused by poorly maintained power tools.
f)
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g)
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into
account the working conditions and the work to be performed.
Use of the power tool for
operations different from those intended could result in a hazardous situation.
h)
Keep handle dry, clean and free from oil and grease.
Slippery handles do not allow for safe handling
and control of the tool in unexpected situations.
5. Service
a)
Have your power tool serviced by
a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
ADDITIONAL SAFETY RULES FOR PLANERS
Wait for the cutter spindle to stop completely before setting down the power tool.
An
exposed rotating
cutter spindle can catch on the surface, resulting in loss of control and serious injuries.
Only hold the power tool by the insulated handle areas as the cutter spindle may touch the tool‘s
mains cable.
Contact with a live wire could cause metal parts of the device to become live and lead to
electric shock.
Fix and secure the workpiece to a stable surface using clamps or other means.
When only securing the
work piece by hand or against your body it will remain unstable, which could lead to
loss of control.
When working, hold the electrical
power tool firmly with both hands and
keep a proper footing and
balance.
It is safer to guide the electrical power tool using both hands.
Do not place your fingers in the planer debris removal port.
D
anger of injury from rotating parts.
Hazards caused by dust!
When working for extended periods on wood and, in particular, materials that
produce dusts that are hazardous to health, connect the appliance to an appropriate dust extraction
appliance.
Wear safety glasses and a dust protection
mask!
Ensure there is sufficient ventilation.
27
Содержание EH0650
Страница 2: ...2...
Страница 3: ...A B 3...