33 | P a g e
PATON
®
PSI STANDARD SERIES DC MIG/MAG TIG/MMA
ELECTRICAL SPARK MAY CAUSE FIRE OR EXPLOSIVES:
Flammable items should be removed from the workplace. Do not perform
welding work on containers that contain gases, fuels, oil products or other
flammable materials. There is a risk of explosion of residue of these
products. When performing welding work in potentially explosive or fire
hazards, special rules must be observed that comply with national and
international standards. Firefighting equipment such as: (powder or snow fire
extinguishers, fire blankets) should be located near the workstation in a
visible, readily accessible place.
BOTTLE CAN EXPLODE:
Use only approved bottles and properly
functioning regulators. The cylinder should be transported and positioned
vertically. Protect the cylinder from heat, overturning and mechanical
damage.
WELDED MATERIALS MAY BURN:
In no case should you touch the
welded parts with bare hands. Always wear protective gloves when operating
the machine. The arc and splinters that develop during the burn can cause
skin burns. Wear protective gloves and pliers when touching or moving the
welded item.
ELECTRIC POWER SOURCES:
It is forbidden to work with damaged
welding wires or on wet substrates. Welding cables should be strong,
undamaged and insulated. Weakened connections and damaged cable must
be replaced immediately. Do not carry the device by pulling it by the power
cord or wires. Do not perform any maintenance work on the unit.
Removing the outside cover of the device while it is connected to the
network and using the device with the lid removed is forbidden.
NOISE ASSOCIATED WITH WELDING CAN BE HARMFUL:
The
welding arc formed during welding can emit sounds higher than 85dB for - 8
hours of working time. Welders operating the equipment are obliged to wear
equivalent hearing protectors during work in accordance with the Regulation
of the Minister of Labor and Social Policy of 6 June 2014r. - Dz. U. 2014
pos. 817. Pursuant to the Ordinance of the Minister of Health on Social
Welfare dated 09.07.1996 OJ No. 68 pos. 194 - The employer is required to
carry out research and measurement of factors harmful to health.
CONFORMITY DECISION:
This device accomplish the recommendation
of the European CE Committee.
Содержание PSI 160 Standard
Страница 1: ......
