Paton PRO-160, Руководство пользователя

Страница: 93 / 99

- 91 -
PATON PRO DC MMA/TIG/MIG/MAG
11. TRANSPORTATION
The packed source is suitable to be transported by all transport means ensuring its
safety in compliance with the transport rules established for the applicable type of
transport.
12. SCOPE OF SUPPLY
7. Arc power source with mains cable - 1 pc;
8. Shoulder strap - 1 pc;
9. PATON corrugated box - 1 pc;
10. Cable with electrode holder ABICOR BINZEL - 1 pc;
11. Welding cable with ground terminal ABICOR BINZEL - 1 pc;
12. User manual - 1 pc.
13. SAFETY RULES
GENERAL PROVISIONS
The welding unit is manufactured in accordance with technical standards and
established safety rules. However, if handled incorrectly, there is a hazard of:
- injury to service personnel or a third party;
- damage to the unit itself or to the company
’ s material assets;
- disruptions to an effective workflow.
All persons involved in the commissioning, operation, care and maintenance of the
unit must
- be appropriately certified;
- have expertise in welding;
- strictly follow these instructions.
The malfunctions that could impair safety must be urgently rectified.
USER RESPONSIBILITIES
The User undertakes to admit to work on the welding unit only the persons who:
- reviewed the basic safety rules, received training on the use of welding equipment;
- read the Section "Safety instructions" and the instructions on necessary precautions
given in this manual, and confirm this with their signature.
PERSONAL PROTECTIVE EQUIPMENT
For personal protection, observe the following rules:
- wear protective footwear that retains insulating properties, even in wet conditions;
- protect hands with insulating gloves;
- protect eyes with a protective mask with an anti-UV filter that meets safety
standards;
- use only suitable (highly inflammable) clothing.