Paton PRO-160, Руководство пользователя

Страница: 91 / 99

- 89 -
PATON PRO DC MMA/TIG/MIG/MAG
a) 8 ... 160A (change step 1A) for PRO-160
b) 10 ... 200A (change step 1A) for PRO-200
c) 12 ... 250A (change step 1A) for PRO-250
d) 12 ... 270A (change step 1A) for RRO-270
e) 14 ... 350A (change step 1A) for RRO-350
f) 16 ... 500A (change step 1A) for PRO-500
g) 18 ... 630A (change step 1A) for PRO-630
1) [t.uP] current build-up time = OFF (by default)
a) 0 [OFF] ... 15.0 sec (change step 0.1 sec)
2) [Po.P] current pulsation power = OFF (by default)
a) 0[OFF] ... 80% (change step 5%)
3) [Fr.P] current pulsation frequency = 10.0 Hz (by default)
a) 0.2 ... 500 Hz (dynamic change step 0.1 Hz...1 Hz)
4) [dut] pulse/pause ratio (duty cycle) – it is the percentage of the current pulse to the
period of repetition of these pulses = 50% (by default)
a) 20 ... 80% (change step 5%)
MIG/MAG welding mode
0) [- 3-] main display. parameter VOLTAGE = 19.0 V (by default)
a) 12.0 ... 24.0 V (step change 0.1 V) for PRO-160
b) 12.0 ... 26.0V (step change 0.1 V) for PRO-200
c) 12.0 ... 28.0V (step change 0.1 V) for PRO-250
d)
12.0 ... 29.0V (step change 0.1 V) for РRO -270
e) 12.0 ... 30.0V (step change 0.1 V) for РRO -350
f) 12.0 ... 40.0V (step change 0.1 V) for PRO-500
g) 12.0 ... 44.0V (step change 0.1 V) for PRO-630
1) [Ind] inductance = OFF (by default)
а) 0 [OFF] ... Stag e 3 (change step 1 stage)
2) [t.up] voltage build-up time = OFF (by default)
a) 0 [OFF] ... 5.0 sec (change step 0.1 sec)
3) [t.dn] voltage reduction time = 0.1 sec (by default)
a) 0.1 ... 5.0 sec (change step 0.1 sec)
4) [Po.P] voltage pulsation power = OFF (by default)
a) 0[OFF] ... 80% (change step 5%)
5) [Fr.P] voltage pulsation frequency = 20Hz (by default)
a) 5 ... 500 Hz (step change 1 Hz)
6) [dut] pulse rate (duty cycle) – it is the percentage of the voltage pulse to the period of
repetition of these pulses = 50% (by default)
a) 20 ... 80% (change step 5%)