Paton PRO-160, Руководство пользователя

Страница: 90 / 99

PATON PRO DC MMA/TIG/MIG/MAG
- 88 -
lock the function selection menu by holding button 3 for more than 3.5 seconds, in the
same way as when unlocking, when the LCD will show closing locks, after this operation the
menu will be locked and now you can try again to change the program number using
button
3 . In this case, all the parameters of the previous program will be saved and you can
always return to it again.
7. GENERAL LIST AND SEQUENCE OF FUNCTIONS
MMA welding mode
0) [- 1 -] - main displayed parameter CURRENT = 90A (by default)
a) 8 ... 160A (change step 1A) for RRO-160
b) 10 ... 200A (change step 1A) for RRO-200
c) 12 ... 250A (change step 1A) for RRO-250
d) 12 ... 270A (change step 1A) for RRO-270
e) 14 ... 350A (change step 1A) for RRO-350
f) 16 ... 500A (change step 1A) for PRO-500
g) 18 ... 630A (change step 1A) for PRO-630
1) [H.St] Hot start power = 40% (by default)
a) 0[OFF] ... 100% (change step 5%)
2) [t.HS] Hot start time = 0.3 sec (by default)
a) 0.1 ... 1.0 sec (change step 0.1 sec)
3) [Ar.F] Arc Force power = 40% (by default)
a) 0 [OFF] ... 100% (change step 5%)
4) [u.AF] Arc force trigger level = 12V (by default)
a) 9 ... 18V (change step 1V)
5) [CVS] current-voltage characteristic slope = 1.4 V/A (by default)
a) 0.2 ... 1.8 V/A (step change 0.4 V/A)
6) [Sh.A] short arc welding = OFF (by default)
a) ON – enabled
b) OFF – disabled
7) [BSn] voltage reduction unit = OFF (by default)
a) ON – enabled
b) OFF – disabled
8) [Po.P] current pulsation power = OFF (by default)
a) 0[OFF] ... 80% (change step 5%)
9) [Fr.P] current pulsation frequency = 5.0 Hz (by default)
a) 0.2 ... 500 Hz (dynamic change step 0.1 Hz...1 Hz)
10) [dut] pulse/pause ratio (duty cycle) - it is the percentage of the current pulse to the
period of repetition of these pulses = 50% (by default)
a) 20 ... 80% (change step 5%)
TIG welding mode
0) [-2-] main display parameter CURRENT = 100A (by default)