PATON
Feeder
DC MIG/MAG
- 14 -
- With traces of corrosion, which caused the defective condition,
- Failed due to exposure of its power and electronic components to excessive moisture,
- Failed due to accumulation of conductive dust inside (coal dust, metal chips, etc.),
- In the case of an unauthorized attempt to repair its components and/or replace the
electronic elements,
- Depending on the operating conditions, it is recommended to remove the protective cover
and clean the internal elements and units with compressed air once every six months to avoid
the failure of the device. Cleaning should be carried out carefully, keeping the compressor
hose at a sufficient distance to avoid damaging the soldered electronic components and
mechanical parts.
The main warranty also does not cover damaged external parts of the equipment that are
subject to physical contact and accessories/consumables, which must be claimed within two
weeks of the date of sale:
- On and off button,
- Welding parameter control knobs,
- Cable and hose connectors,
- Control connectors,
- Power cord and power cord plug,
- Carrying handle, shoulder strap, case, box,
- Electrode holder, ground clamp, torch, welding cables and hoses.
The seller reserves the right to refuse to provide warranty repairs, or set the month and year
of manufacture of the device (determined by the serial number) as the date of the warranty
obligations beginning:
- In case of loss of the certificate by the owner,
- In the absence of correct or any filling of the certificate by the seller when selling the
machine,
- The warranty period is extended for the period of warranty service in the service center.
